ISO 06185-1 pdf download – Inflatable boats 一Part 1: Boats with a maximum motor power rating of 4,5 kW.
4.3.2 Ptywood
All plywood used shal incorporate hardwoods for both internal and external veneers and the bonding adhesive shaN be Waterproof and boil-proof The timber used shall be seasoned and tree from sapwood, decay, insect attack. splits and other imperfections likely to adversely affect the performance of the material. The timber shall be generally tree from knots but an occasional sound .ntergrown knot is acceptable
Other timbers, e.g. Douglas Fir. may be used for the veneers provided that they era treated to give prOteCbon against rot. fungal decay and marine borers. Adjoining edges andor surfaces, including any end-grain, shall be effectively sealed
4.3.3 Constructional timbers
The timber used in the construction shall be seasoned and free from sapwood, shakes and other defects.
4.4 Metal and synthetic material parts
Materials used shall be of a type, strength arid finish suitable for the intended purpose of the components and
compatible with the marine environment.
4.5 Glass-fibre-reInforced plastics
Resins, reinforcements and laminates shall comply with the requirements of ISO 12215-1
5 FunctIonal components
5.1 Conditioning
All tests shall be performed at a temperature of 20 C ±3 C.
5.2 Hull fittings
5.2.1 RequIrement
The materials and method of construction used shall be compatible with that of the hull itself Any load-beanng fitting attached to the boat (see 3.1 and 3.2) shall not, when loaded as described in 5.22, resutt in any impairment In awtightness or water integrity.
5.2.2 Test method
Any cordage used for test purposes shall have a diameter of 8mm.
Grackially load the fillings In any direction up to breakmg poe’it but not exceeding 2 kN. If 2 kN Is reached, maintain this load for I mm.
5.3 Manual lifting and carrying devices
5.3.1 Requirement
The boat shall be equipped with a means for carrying it. There shaM be no failure of the device when tested in accordance with 5.3.2.
5.8 Rudder steering system (where offered as standard or optional equipment)
58.1 Strength of the assembly
5.8.1.1 RequIrement
No fracture or other damage shall occur following 500 movements 04 the ruddev-blade over an angle of 60,
5.81.2 Test method
Each movement (cycle) shall be carried out within I a and shall include the complete steering gear. The rudder-
blade shall be submerged in its service position.
5.8.2 Rudder-blade
5.8.2.1 Requirement
The rudder-blade shall be capable of being hoisted to the level of the boat bottom and of being fixed in its working
position without the use of tools.
5.8.2.2 Test method
Function test followed by visual inspection.
5.9 Remote steering system (Type II only where offered as standard or optional equipment)
Any remote steering system shall conform to the requirements of ISO 15652 and ISO 9775.
There shall be no damage or malfunction to either the system or to any related attachments to the boat when tested in accordance with clause 7.
5.10 Motor-securing line attachment (Type II only)
A means for attaching a motor-securing line shall be provided at an appropriate position.
5.11 TowIng device (all types)
All craft shall have, at their bow, a towing device suitable for securing a towline. See 7.3 for strength test.
5.12 Seating and attachment systems (where offered as standard or optional equipment)
There shall be no damage or malfunction to either the seating or to any related attachment systems when tested ii
accordance with clause 7.
6 Safety requirements of the completed boat
6.1 Maximum permissible number of persons
The maximum permissible number of persons a carried shall be calculated for each boat type as follows.
ISO 06185-1 pdf download – Inflatable boats 一Part 1: Boats with a maximum motor power rating of 4,5 kW
